打印机兄弟7860加粉清零方法(Brother 7860 Printer Reset Toner for Ink Refill in 4 Steps)

Brother 7860 Printer Reset Toner for Ink Refill in 4 Steps

Brother 7860 printer is an excellent all-in-one printer that can print, scan, and copy your documents with ease. However, like all printers, it requires ink refills from time to time. After refilling the ink, you might notice that the printer still displays the 'low toner' warning. In this article, we will guide you on how to reset the toner after ink refill in four simple steps.

Step 1: Turn off your printer

The first step is to turn off your Brother 7860 printer. This is an essential step as it ensures that the reset process starts from scratch. Turning off the printer will also prevent any damages that may occur if you reset the toner while the printer is still running.

Step 2: Open the front cover of the printer

The next step is to open the front cover of the printer. You can do this by pulling the handle located near the front panel of the printer. Once the cover is open, you will see the toner cartridges.

Step 3: Press and hold the 'Go' button

Now, press and hold the 'Go' button located on the front panel of the printer for a few seconds. Keep holding the button until the toner LED lights up. You can release the button now.

Step 4: Close the front cover and turn on the printer

Close the front cover of the printer now. Turn on the printer, and you will notice that the toner warning message is not displaying anymore. The printer's toner cartridge has been reset, and it is now ready to use.

In conclusion, resetting the toner of your Brother 7860 printer after ink refill does not have to be a daunting task. By following the simple steps outlined above, you can save both time and money. You will no longer have to worry about your printer displaying the 'low toner' warning every time you refill the ink. Remember to turn off the printer during the reset process to prevent any damages to the printer's components.