打印机L130废墨清零(佳能L130打印机废墨清零教程)

Introduction

The Canon L130 printer is a popular choice among home and small office users. However, it is important to keep in mind that the printer's ink cartridges have a limited lifespan and eventually need replacement. Over time, the printer's internal ink pad can accumulate excess ink and lead to various issues including print quality deterioration. In this guide, we will show you how to reset your Canon L130 printer's waste ink counter and clear out the excess ink that has collected within the printer's internal ink pad.

What is the waste ink counter?

The waste ink counter is a mechanism within the Canon L130 printer that monitors the amount of ink the printer consumes during its lifetime. The counter keeps track of the ink used during head cleanings, printing, and other maintenance tasks. Once the counter reaches a certain level, the printer will stop printing and display an error message indicating that the waste ink counter is full, and the printer needs to be serviced.

What causes the waste ink counter to fill up?

The waste ink counter fills up over time as the printer consumes ink during cleaning cycles, printing, and other maintenance tasks. If the waste ink counter is not reset, the printer will stop functioning, and you'll need to take it in for service. However, you can reset the waste ink counter yourself by following the steps below.

How to reset the waste ink counter on a Canon L130 printer

Resetting the waste ink counter on the Canon L130 printer is a relatively simple process that can be completed in just a few steps. Here's what you need to do:

Make sure your Canon L130 printer is turned off.

Press and hold the Resume button (triangle inside a circle) and Power button simultaneously.

Release the Resume button while holding down the Power button.

Keep holding down the Power button and press the Resume button twice.

Release both buttons simultaneously.

The printer screen will now display the "Service Mode" menu.

Use the arrow keys to navigate to the "EEPROM Clear" option and press the Power button to select.

Select "Waste ink counter reset," and then press the power button to confirm.

Turn off the printer and turn it back on, and your waste ink counter will have been reset.

How to clear the excess ink from your Canon L130 printer

After resetting the waste ink counter, it's important to clear out any excess ink that has accumulated within the printer's internal ink pad. Here's what you need to do:

Turn off the Canon L130 printer and unplug the power cord from the back.

Locate the ink pad compartment, which is located underneath the printer's ink cartridge holder.

Carefully remove the ink pad tray and dispose of the ink pad, which will be soaked with ink.

Clean the inside of the ink pad compartment with a clean, damp cloth to remove excess ink.

Allow the compartment to dry completely.

Install a new ink pad, or reinsert the old ink pad tray if it is still in good condition.

Plug the power cord back into the printer and turn it on.

Conclusion

Resetting the waste ink counter and clearing out excess ink from your Canon L130 printer is an important maintenance task that can help prolong the life of your printer and improve its overall performance. By following these simple steps, you can easily perform this task and keep your printer functioning correctly for years to come.